The concrete batching plant puts sand and gravel, powder, water, admixtures, etc. into the concrete mixer through the processes of storage, batching, metering, transportation, etc., so as to make concrete after mixing to meet the needs of buildings, roads, docks, bridges and other buildings. engineering needs.
The wide application of concrete determines that a rigorous work attitude must be guaranteed in the production process. Users need to concentrate and not tolerate any sloppiness.
After the user starts the concrete mixing station, the concrete mixer should be idling to check the operation of the mixer. After confirming that the mixer is running normally, it can start to work.
It is strictly forbidden to operate under load for a long time.
During the official operation of the concrete batching plant, the operator must maintain a high degree of concentration and pay attention to observe the operation of each part.
For example, batching systems such as instruments, belt conveyors, and batching machines should be carefully observed, especially large stones or sharp foreign objects on the belt, which are easy to damage the belt.
If these are found, they should be removed in time. In the production process of the concrete batching plant, in case of emergency, the power supply needs to be cut off immediately before inspection and maintenance work can be carried out. Be sure to remember: cut off the power.
Contact Person: Mr. Steve Wan
Tel: +86 18703811581